Combination Exterior Shutters

General
Measuring

Combination shutters use louvers and raised panels. Our combination exterior shutters are constructed with solid incense cedar components in three distinct louver sizes and exterior-grade MDF raised panels. While sizes are not “custom”, both the width and height are offered in full inch increments. The louvered shutters can then be trimmed to achieve the desired size.

Material

Solid Components
Kiln Dried Incense Cedar stiles, rails, & louvers
Exterior-grade MDF raised panels
Unfinished, Ready to Paint - CANNOT be stained

Assembly

Joints glued and doweled on 1" centers

Louvers: (Above Divider Rail)	1 1/4" wide x 1/4" thick 1 3/4" wide x 3/8" thick 2 1/4" wide x 3/8" thick
Raised Panel :	1 3/4" wide edge tapered from 1/2" to 1/4" 3/4" thick raised area
Side Stiles:	1 1/8" thick x 2" wide
Top Rail:	1 1/8" thick x Variable height
Bottom Rail:	1 1/8" thick x 4 3/8" height
Divider Rail:	1 1/8" thick x Variable height(required)

View printable PDF specification page for:
1 ¼” Combo 1 ¾” Combo 2 ¼” Combo

Wood exterior combination shutters can be installed to be functional (swing open and closed), but most often are stationary. Non-functional exterior shutters require less precise measurements than those that operate.

Non-functional combination shutters

Shutter Width for Non-Functional Exterior Combination Shutters

Measure each window width from the outside edge of window trim to the same spot on the opposite side. Calculate shutter panel width, starting with the smalleste window. Window widths narrower than 60 inches can appear to have functional shutters by ordering panels half of the window width. Windows larger than 60 inches, while unable to appear functional, should use panel sizes between 30% and 50% of the window width. Consider panel widths of narrow windows when determining panel widths for larger windows. Do not exceed a panel width greater than 50% of the window

Shutter Height for Non-Functional Exterior Combination Shutters

Measure each window width from the top edge of the window trim to the bottom edge of the window trim. If there is a sill at the bottom of the window, measure to the top of the sill. Install the shutters about 1/4 inch above the sill. Exterior shutters are sold in full inch increments, but can be trimmed to match the window height.

See Measuring Instructions for functional combination shutters and greater overall detail.

Order Center

step 1: Panel Dimensions

a. Panel Width:
b. Panel Height:
c. Louver Size:

step 2: Panel Options

a. Shutter Caps: yes no

step 3: Quantity

Enter the number of individual shutters panels (NOT pairs) with these specifications you require.

Quantity: Calculate

Item Summary

Combination Shutter Panel
Quantity
Total Price

Note: Shipping amount will calculate in the shopping cart based on products selected and shipping destination

Preview

" 4 3/8" 2" 2" "

Numerical values shown are reflective of shutter panel specified
*rendering is not to scale

Product Reviews

Having checked many sources for exterior / good quality cedar shutters, I found Shutterland to have a good selection with the sizes I needed and excellent quality. The replacement shutters I ordered are all painted and up on our newly painted house and they look great. Our painter intends to recommend Shutterland to other customers that need replacement shutters. This painter, by the way does only restoration work.

David F.

The replacement shutters I ordered are all painted and up on our newly painted house and they look great.

Great selection of sizes and styles; easy to order on line. Delivery was timely, the quality outstanding. It was a pleasure to be your customer.

James B.

Great selection of sizes and styles; easy to order on line.

I was amazed at the quality of your product. It was far superior to any other shutter material I have purchased. Excellent quality material and a smooth finished product.

Bruce G.

...far superior to any other shutter material...